MIDORI® Construction power distributor 0-1 switch, 32A, 16A, 2x 230V wired

Product information "MIDORI® Construction power distributor 0-1 switch, 32A, 16A, 2x 230V wired".

Midori construction power distributor with cam switch

Wherever you need electricity, our high-quality construction power distributor is there for you. Whether you want to use in on the construction site, in the workshop or in your garage, simply mount it on the wall, have it installed and you can already benefit from the additional sockets. Our construction power distributor provides you with 2 sockets for all standard household appliances that are operated with 230 V. These two sockets can be conveniently switched on and off thanks to the cam switch. In addition, our wall-mounted distributor also offers you a 16 A and 32 A heavy current socket, to which you can connect industrial machines or an e-car. Thanks to the high-quality workmanship, you can use our construction power distributor both indoors and outdoors.

High quality and durable ABS material

A construction power distribution box must be able to withstand many conditions safely. For this reason, we manufacture our high-quality power distribution boxes from absolutely safe and robust ABS material. ABS (acrylonitrile butadiene styrene) is often used as a housing for electrical installations due to its material properties. Thanks to the toughness and rigidity of the material, our construction power distribution board is not only impact and scratch resistant, but also resistant to grease, oil temperature fluctuation and electronic charge. In addition, the power distribution boxes are dirt and moisture repellent, which allows it to be used outdoors. To make this really safe, our wall-mounted distributors are produced according to the IP44 degree of protection, which assures you that foreign bodies with a size of > 1 mm and splashing water cannot penetrate.

Protective flap with a view

If you want to have the fuses on our construction power distributor always in view, but still want to keep the protective flap closed, it is important to use a transparent protective flap. However, in order for this to be safe, it must be made of high quality materials. We use robust polycarbonate (PC) for our fuse cover. This material combines properties that will help you in your work. The thermal plastic combines high transparency with high heat resistance and good impact strength. This makes it possible to keep an eye on the fuses without opening the protective cover. The good electrical insulation properties and resistance to dilute acids, greases, oils and ethanol should also not be underestimated. For your protection and the protection of the fuses, the degree of protection IP44 has also been observed here. We should not withhold one important point from you. Should you open the protective flap to work on the fuses, you have the advantage that you do not have to hold it. Thanks to the latching function of the flap in the uppermost position, you always have unhindered access.

Two household sockets with 230 V

You can always use a power outlet. Whether you want to charge batteries for your equipment on a construction site, need more light or want to make yourself a coffee. With our construction power distributor you get two sockets to connect household appliances. The sockets are protected with 16 amperes each. Since it is a standard socket, it has only 1 phase. The maximum power that our sockets can provide is 3.68 kW (3,680 watts). You can easily calculate the maximum power by multiplying the voltage (volts) by the amperage (amps). Please be careful not to exceed the maximum power, as overloading can quickly cause severe heat buildup. To make the sockets safe for outdoor use, we have installed self-closing cover flaps that meet IP44 protection rating. And thanks to the integrated cam switch, you can turn off the sockets without having to remove the fuse. To do this, all you have to do is switch the cam switch from position I to 0 and the sockets will no longer be supplied with power.

16 A power socket for your needs

To be able to operate a concrete mixer on the construction site or to charge an e-car in the garage, you need a heavy current connection. With our construction power distributor you have the possibility to operate industrial machines safely and stably, thanks to the use of 3 phase alternating current, or to be able to charge your car. The 3-phase alternating current is also known as industrial current, power current, three-phase current or heavy current. To use this current safely, you need a robust and maintenance-free CEE 16 A socket. Here you can connect a CEE 16 A power cable, which consists of 3 phases (the outer conductors), a neutral conductor and an earth. There is a voltage of 230 V between one phase and the neutral conductor. Thanks to this voltage, the maximum power is 11,000 watts, or rather 11 kW. The power socket is fused with 16 amperes. With these characteristics, a 400 V device can be operated safely and stably. By the way, in the European area alternating current has a stable frequency of 50 Hz. So that the 16 A socket on our power distributor, is also safe when used outdoors, a self-closing flap is also attached here, which protects the socket from foreign objects and splashing water.

High power with the 32 A socket

To operate large industrial equipment safely and with stable voltage, you need a CEE 32 A power socket. To prepare you for all eventualities, we have attached just such a socket to our construction power distributor. This socket is designed for continuous operation and offers you a voltage of 380 to 400 V, which is protected by 32 amperes. This results in a maximum power of 22 kW. Here you can connect a 5-pole, 32 A power cable consisting of 3 phases, a neutral conductor and an earth. However, a mix-up with the 16 A plug is impossible here, as the 32 A plug is larger and the cable is thicker. So your safety is ensured in any case. In order to keep safety high and to guarantee that you can use the construction power distributor outdoors, the CEE 32 A socket is equipped with a self-closing flap which, according to IP44, protects the socket from foreign bodies with a diameter of more than 1 mm and from splash water. Use our wall distributor and benefit from the high protection and the many connection options.

The best fuses for your protection

We want to supply you with construction power distributors that are optimally protected and fused to a high standard. For this reason, we rely on the fuses of the company Hager. Schneider is a German family-owned company that has been producing fuses for electrical installations since 1955. For our 230 V sockets we use a 1-pole 16 A fuse with an insulation voltage of 500 V and a surge voltage resistance of 4000 V. On the other hand, we protect the 16 A socket with a 3 pole 16 A fuse, which has the same insulation voltage and surge voltage resistance. The 32 A power socket must also be correctly fused to prevent consequential damage. The Schneider fuse for this connection offers exactly the right fuse with 32 A and the 3-pole connection. In order to be able to switch off the entire wall distributor at once, we use a high-quality Schneider RCD switch. This 4-pole switch is fused with 40 Amper, has an insulation voltage of 500 V and an impulse voltage resistance of 4000 V. We care about your safety and with our high quality, robust construction power distribution board you can be sure to get this safety.

Technical data

Manifold dimensions:

• Length: 32.4 cm
• Width: 24,4 cm
• Depth: ~ 16 cm (incl. sockets)
• Overall dimensions (L x W x D): 324 x 244 x 160 mm

Sockets:

• 1 x 32 A / 5P, 400 V, maximum power: 11 kW
• 1 x 16 A / 5P, 400 V, maximum power: 22 kW
• 2 x 230 V, 16 A / 1P, maximum power: 3.68 kW

Fuses:

• Residual current circuit breaker 4 pole 40A/30mA type AC Schneider x 1
• circuit breaker 1 pole 6kA C-characteristic 16A 1 module Schneider x 4
• Circuit breaker 3 pole 6kA C-characteristic 16A 3 modules Schneider x 1
• Circuit breaker 3 pole 6kA C-characteristic 32A 3 modules Schneider x1
• Phase bar 3 pole with fork connection 10mm² 63A 12 modules Schneider x 1

Protection class:

• IP44 (protected against splashing water and foreign bodies with a diameter >1mm).

Material:

• Housing: ABS (Acrylonitrile Butadiene Styrene)
• Protective cover: PC (polycarbonate)

Properties:

• moisture and dirt repellent
• resistant to diluted acids, oils, greases, ethanol
• heat resistant
• resistant to electronic charge
• good electronic insulating properties
• resistant to temperature fluctuations
• impact and scratch resistant

IMPORTANT NOTE: The installation of the construction power distribution board must be carried out by a competent eclectic!!!