Spectrum® 3D PET-G Matt Filament 1.75mm 1kg Spool

Spectrum PLA Matt Filament

Spectrum's matte filaments are made on the basis of PET-G and chemically modified in such a way that the matte surface is obtained after printing. In addition, the PET-G matte filaments are more temperature resistant, less brittle and have UV protection. The appealing aesthetics and excellent properties make Spectrum PET-G Matt Filaments an absolute eye-catcher and indispensable for anyone who likes to create 3D models.

Familiar material in a matt look

The polyethylene terephthalate used is also the basis of the Spectrum PET-G Matt filaments. As a result, you can rely on the good creep resistance, long service life and very low shrinkage. However, thanks to chemical modification and the use of additives, the PET-G Matt material is improved even further. For example, brittleness is reduced, temperature resistance and impact bending strength are increased, and UV stabilization is also achieved.

A wide range of applications thanks to a special look

Thanks to the matte surface, Spectrum 3D PET-G Matt filaments offer you a wide range of possible applications. You can create decorative objects that are very robust and resistant and exude an elegant look. Thanks to the modified composition, the visibility of the individual layers on the side surfaces of the manufactured elements is significantly minimized. Thus, with PET-G Matt filaments, you can create and present high-quality architectural models in addition to decorative items.

Fields of application:

• Interior design and decoration
• architectural models
• educational objects
• Initial fabrication of industrial designs to visualize concepts

Technical data:

• Brand: Spectrum
• Material: PET-G (Polyethylenterephthalat)
• Wire thickness: 1,75 mm
• Dimensional accuracy: + / - 0.03 mm
• Content / Weight: 1kg
• Length: ca. 308,12 m
• Recommended print temperature: 230 - 255 °C
• Recommended print bed temperature: 60 - 80 °C
• Suggested printing speed: 30 - 70 mm/s
• Material density: 1.35 g/cm3

• Impact strength unnotched at +23°C: 85 kJ/m2
• Impact strength not notched at +23°C: 3.5 kJ/m2
• Tensile elongation: 3.1 %
• Tensile strength: 45 MPa
• Heat forming temperature: 70°C
• modulus of elasticity: 3150 MPa
• Active fan: Yes
• Layer height: 0.05 - 0.30 mm
• Shell thickness: 0.40 – 2.70 mm
• Closed construction space: not necessary
• Drying box: not necessary
• Ruby or hardened nozzle: not necessary

• Spool diameter: 200mm
• Spool width: 68mm
• Spool hub hole diameter: 52mm
• Spool gross weight: ca. 1247g
• Weight of an empty Spool: ca. 247g