Midori® 3D PLA Filament 1.75mm 1kg Spool Signal Red RAL 3001

Product information "Midori® 3D PLA Filament 1.75mm 1kg Spool Signal Red RAL 3001"

Midori PLA premium filaments

With our Midori filaments, we have made it to our task to offer you a premium filament that clearly stands out from the market in terms of its roundness, dimensional accuracy and color fastness, because nothing is more regrettable than when a print job breaks off after several hours of running time due to bad material or colors cannot be reproduced.

Qualitätsware für Qualitätsdrucke

Our Midori 3D filaments are characterized by a neatly wound spool, perfect roundness, and extensive compatibility with various FDM 3D printers and pens. With our filaments, you benefit from unhindered printing sessions and excellent printing results.

Excellent printing results thanks to pure PLA

Compared to conventional PLA competing products, our Midori PLA 3D filaments are made of pure PLA (Polylactic Acid). Compared to conventional mixtures, pure PLA has the advantage of better shaping without the formation of bubbles, warping or clogging. In this way, smooth prints with excellent layer adhesion and high rigidity are achieved.

Tangle-free spooling for smooth printings

Thanks to their layer-by-layer technology, the high-quality Midori 3D filaments enable tangle-free winding and neat turns, so that longer printing processes can be managed without any problems without knots, overlaps or crossings. This not only ensures extremely even prints, but also counteracts possible blockages in the extruder.

Constant diameter in every centimeter

With our 1.75 mm PLA 3D filaments, we rely on the highest precision in the entire production process. The filaments are manufactured under the strictest testing mechanisms, so that the diameter of the high-quality filaments has a tolerance of only +/- 0.05 mm in every centimeter. The result is an almost constant filament diameter, which prevents jams and ensures smooth printing without interruptions, which results in minimal shrinkage, a smoother surface and stronger layer adhesion during printing.

PLA - the environmentally friendly material

The Midori PLA 3D filaments are made from polylactic acid, which is made from renewable and natural raw materials such as corn. The natural material is completely biodegradable and therefore harmless to the environment. In addition, the PLA has the advantage that it is completely odorless compared to other plastics.

Optimal protection & ideal storage conditions thanks to special packaging

Our Midori 3D filaments are wound on extremely high-quality transparent spools, which, unlike conventional inferior spools, can also be heated for optimal printing results. Each spool is provided with information about the type of material, the diameter, the color (if necessary with the RAL number) and the printing temperature. To protect against dust and foreign matter, the Midori 3D filaments, unlike competing filaments, are vacuum-sealed in moisture-proof and opaque aluminum foil with a silica moisture-proof bag, which creates optimal storage conditions. In order to ensure the ideal condition of the filaments when they arrive, the spools are packed in shrink-wrapped outer boxes.

Wide compatibility with many FDM 3D printers & pens

The 1.75 mm Midori PLA 3D filaments have been developed universally and are widely compatible with the most FDM 3D printers and pens for 1.75 mm filaments.

Technical specifications

• Brand: Midori
• Material: PLA (Polylactic Acid)
• Wire thickness: 1.75 mm
• Dimensional accuracy: +/- 0.05 mm
• Contents: 1000 g
• Length: 345 m
• Color: Signal Red (RAL3001)
• Recommended printing temperature: 190 - 220 °C
• Recommended print bed temperature: 20 - 40 °C
• Spool diameter: 200 mm
• Spool width: 68 mm
• Spool hub hole diameter: 53 mm
• Gross spool weight: 1.25 kg

Further product data

• Material density: 1.24 g/cm³
• Melt flow rate: 6 g/10 min (210 ° C, 2.16 kg)
• Tensile elongation: 6%, ASTM D882
• Notched Izod impact: 16 kJ/m²
• Tensile strength: 53 MPa, ASTM D882
• Heat deflection temperature (HDT): 55 °C
• Glass transition temperature: 57 °C
• Suggested printing speed: 30 - 120 mm/s
• Weight of an empty spool: 0.25 kg