Spectrum® 3D PLA Glow In The Dark Filament 1.75mm 0.5kg Spool

Spectrum PLA Glow in the Dark Filament

A decorative model by day and a glowing highlight by night. Create creative models that start to glow in the dark with the high-quality Spectrum PLA Glow in the Dark Filaments. The filament combines all the properties of PLA, is easy to process and has a high strength. Thanks to the enrichment of the material phosphorescent pigments, the aesthetic effect is further increased, especially in the dark.

The material that glows

The filaments are manufactured on the basis of polylactic acid (PLA). As a result, Spectrum PLA Glow in the Dark filaments are biodegradable as usual, have a high printing efficiency and a high tensile strength. In order for the material to glow, Spectrum PLA Glow in the Dark is enriched with concentrated phosphorescent pigments, which creates the effect of photoluminescence, or more precisely, a phosphorescence. This phenomenon makes it possible, after previous exposure to an external light source, to glow with its own light. The enrichment with the pigment does not cause any disadvantages for the material, because the pigments have a neutral effect on the material.

Decoration or signpost?

Since the PLA Glow in the Dark filaments have the ability, after prior exposure, to glow on their own, the models produced are not only suitable as decorative objects, but can also be useful helpers to find the way in case of power failures. By selectively controlling the wall thickness and filling density, you also have the ability to regulate" the light intensity of the elements.

Areas of application:

- Objects with significant decorative and artistic effect.

- Objects for easier identification of emergency exits in case of power failure

- Advertising and decoration industry in a broader sense

- Production of souvenirs, luminous gadgets and figurines.

Technical data:

• Brand: Spectrum
• Material: PLA (Polylactic Acid)
• Wire thickness: 1,75 mm
• Dimensional accuracy: + / - 0.03 mm
• Content / Weight: 0,5 kg
• Length: ca. 167,73 m
• Recommended print temperature: 185 - 225 °C
• Recommended print bed temperature: 0 - 45 °C
• Suggested printing speed: 40 - 110 mm/s
• Material density: 1.24 g/cm3
• Melt flow index (MFR): 6 g /10 min

• Impact strength not notched at +23°C: 16 J/m
• Tensile elongation: 0,06
• Tensile strength: 53 MPa
• Tensile modulus: 3.5 Gpa
• Flexural strength: 83 MPa
• Flexural modulus: 3.8 MPa
• Heat forming temperature: 55 °C
• Glass transition temperature: 55 - 60 °C
• Active fan: Yes
• Layer height: 0.05 - 0.30 mm
• Shell thickness: 0.40 – 2.70 mm
• Closed construction space: not necessary
• Drying box: not necessary
• Ruby or hardened nozzle: not necessary

• Spool diameter: 200mm
• Spool width: 55mm
• Spool hub hole diameter: 52mm
• Spool gross weight: ca. 747g
• Weight of an empty Spool: ca. 232g

Important Note: Note: For a stronger and longer glowing effect, leave the model exposed to the light source longer. The presence of a phosphor pigment can lead to abrasive wear of the brass nozzles, so the use of stainless steel nozzles is recommended for long-term use of Spectrum PLA Glow in the Dark.